I'm finally getting around to posting the results of a couple of years ago, when we completed installing the Greek Revival fireplace and Delft/Spode/etc. tile insert. As this was originally done at Christmastime, you'll forgive the decor being odd for my summer posting.
Not only did it end up being, I think, a really perfect addition to the room, but it quite handily provided a better spot for the tv than the somewhat lower, all-black, massive console which had previously stood in its place (and which we donated to a local charity shop). In order to take care of the many irregularities in the wooden backing of the mantle itself my partner first build a U-shaped structure that attached to the wall. To fit it as closely as possible it was necessary to decide whether to cut into the existing skirting boards at the base of the wall, or to notch out the dimensions of the board from the base of the box. I was concerned that, should we decide to the move the fireplace unit with us to another home, that we'd regret making modifications to it, but my partner assured me that we'd likely meet a similar issue in the next home, and that he could replace the box easily enough.
The next step was to build and attach the tiled insert, which we did with a piece of MDF (IIRC, from what he did), and to tile the front much as one would do in a kitchen or a bathroom. Since many of the tiles are original, and in some cases antique, Spode or Delft tiles I took the opportunity to photograph them from every angle, including the back first. I arranged them for him in an order that made sense to me, no two tiles being too similar next to each other. You'll note that several of them have nautical or boat themes, which is deliberate as several of the paintings in the room are either of water or of boats. That being done, he tiled the insert and attached it to the box, and then set about building the platform for the fireplace insert itself. This is really just a simple, small, rectangular box, which I then painted with the same paint I used for the sanded areas of the outer mantle.
We plugged the fireplace in and scooted it into place, to check that everything worked. At this point we knew that there would be a small gap between the upper edge of the tiling and the lower edge of the mantle itself. Initially we thought that this might not be too distracting and would provide needed ventilation; but the insert actually vented very well from the front of the unit and I did find the gap distracting. The solution was the buy a piece of pre-painted white molding, cut it to size and adhere it to the inside edge of the mantle so that it sits above and in front of the tiled section. No one would ever be the wiser (except that it's on the internet now).
Finally, we moved the antique mantle into place, leveled it, and attached it to the box and frame, which are screwed into the wall with huge anchors. There was some touch-up painting, and some rather more extensive painting of the box; which should have been done before most of the rest of the process, but wasn't due to time constraints owing to when my partner could be in town.
It being Christmastime when everything was completed, we had to decorate with some evergreens and holly from our own property, as well as the blue and white porcelains which I collect. Then we hung some stockings.
This year, almost a year after it was initially completed, my husband and I were able to hang one more in joyful anticipation of what the new year would bring.
No comments:
Post a Comment